What are the specifications of butyl tape? Instructions

Huanggang Ju'ao Ming New Material Co., Ltd. will first talk about the coiled material. The coiled material is usually used in large-area paving places, such as the overall waterproofing of the roof, underground storage rooms or other waterproof constructions in confined spaces. Butyl tape, as the name suggests, is similar to most of the tapes on the market, except that this tape is a waterproof tape made of butyl rubber, which is mostly used for roof cracks, water pipes and other leaks.

We usually have coils with widths of 1m, 1.1m and 1.2m. We recommend that the length of a coil should not exceed 15m, and the preferred length is 10m. The butyl coil of this specification is better in packaging and more convenient for transportation. a specification. The common specification of butyl tape is 5cm*10m. Of course, as a qualified manufacturer, we can also do 10cm, 15cm, etc. Usually, we will decide whether to use butyl coil or tape according to the actual construction area. How to choose so many specifications? The editor provides you with the specifications of the construction scene, and a variety of specifications can be customized~

1. The glass joint of the sun room - 10cm, 15cm;

2. The joint between the ground and the wall - 10cm, 15cm;

3. The seam of the color steel room - 10cm, 15cm;

4. Joints between windows and walls - 10cm, 15cm, 20cm;

5. Cracks in cement roof - 10cm, 15cm, 20cm;

6. Color steel tiles and façade joints - 15cm, 20cm, 33cm, 50cm;

7. The joint between the tile surface and the façade - 20cm, 33cm, 50cm;

8. Large area of roof waterproofing - 1m. What are the methods of using butyl tape? Find out below.

Joint leakage between profiled steel plate and cement wall

(1) Clean up the original silicone glue at the joint between the profiled steel plate and the cement wall;

(2) Then clean the joint between the profiled steel plate and the cement wall. It is required that the cement wall should not be polished with sandpaper, and the base treatment agent should be used if conditions permit.

(3) The joint between the metal plate and the cement wall is pasted with single-sided aluminum foil opening tape, and then the repaired part is rolled up so that the single-sided aluminum foil butyl tape is firmly bonded at the joint.

Use of double-sided tape

(1) After the lighting board is installed on the frame. Use tape to wipe the part of the aluminum alloy platen to be bonded.

(2) Open the tape at the grooves on both sides of the aluminum alloy pressing plate, press the tape tightly and tear off the release paper after installation, and install the aluminum alloy pressing plate on the lighting board.